DGI.Framework.Transport.Ross.RossTalkDriver by: Alvaro.Yurrita

Package Description

DGI.Framework.Transport.VisionarySolutions.DecoderDriver by: Alvaro.Yurrita

Driver to communicate with Visionary Solutions Decoders. Intended to be use with a UDP Interface. It will start polling the decoder when registered. It will stop polling when unregistered. Polling will happen every 2 seconds

DGI.Framework.Transport.VisionarySolutions.Series4Driver by: Alvaro Yurrita

Driver to communicate with Visionary Solutions Series 4 Devices. Intended to be use with a UDP Interface. This driver was tested against a Visionary Solutions Series 4 Decoder using firmware 2.3.16 and API Specification 2.x.x

DGI.Framework.Transport.VisionarySolutions.Series5Driver by: Alvaro Yurrita

Driver to communicate with Visionary Solutions Series 5 Devices. Intended to be use with a UDP Interface. This driver was tested against a Visionary Solutions Series 5 Decoder using firmware 3.13.56 and API Specification 3.5

Dgi.Nvx.Edid.Management by: Alvaro Yurrita

A C# driver for querying and modifying the EDID table on Crestron DM NVX endpoints via the CresNext HTTPS API.

DGI.Resolve_mDnsHostnameDriver by: Alvaro Yurrita

Package Description

DGI.ResolveHostnameDriver by: Alvaro Yurrita

Resolves Hostnames either through DNS or mDNS

Dgi.Simpl.Configuration.Manager.Module by: Alvaro Yurrita

This module provides a SIMPL+ module that allows for the management of configuration parameters through a web interface.

DGI.Simpl.DgiCommunicationsAdapter by: Alvaro.Yurrita

Package Description

DGI.Simpl.Ross.RossProbelDriver by: Alvaro.Yurrita

Ross Probel driver communicates with Ultrix Routers or any other video router that uses RossProbel protocol

DGI.Simpl.Ross.RossTalkDriver by: Alvaro.Yurrita

Initial Release

Dgi.Simpl.Sony.DisplaySimpleIPControl.Module by: Alvaro Yurrita

Initial Release

DGI.Simpl.Ssh.Client.Module by: Alvaro.Yurrita

Opens a SSH connection with a third-party Ethernet device for as long as the Connect input is high. It supports reconnecting to the device when the connection is lost. It supports setting Port, IP address, Username and Password during runtime with auto reconnect. Does not log connection errors to the log.

DGI.Simpl.Tcp.Client.Module by: Alvaro.Yurrita

Opens a TCP socket with a third-party Ethernet device for as long as the input is high. It supports reconnecting to the device when the connection is lost. It supports setting Port, and IP address during runtime with auto reconnect. Does not log connection errors to the log.

DGI.Simpl.Udp.Client.Module by: Alvaro.Yurrita

Listens In a UDP socket with a third-party Ethernet device for as long as the Connect input is high. It supports reconnecting to the device when the connection is lost. It supports setting Port, and IP address during runtime with auto reconnect. Does not log connection errors to the log.

DGI.Simpl.Vaddio.RoboShotModule by: Alvaro.Yurrita

SIMPL Module to connect to Vaddio RoboShot Cameras Intended to be use with an SSH Interface.

DGI.Simpl.Visionary.Solutions.Series4.Module by: Alvaro Yurrita

SIMPL Module to communicate with Visionary Solutions Series 4 Devices. Intended to be use with a UDP Interface. This driver was tested against a Visionary Solutions Series 4 Decoder using firmware 2.3.16 and API Specification 2.x.x

DGI.Simpl.Visionary.Solutions.Series5.Module by: Alvaro Yurrita

SIMPL Module to communicate with Visionary Solutions Series 5 Devices. Intended to be use with a UDP Interface. This driver was tested against a Visionary Solutions Series 5 Decoder using firmware 3.13.56 and API Specification 3.5

DGI.Simpl.VisionarySolutions.DecoderDriver by: Alvaro.Yurrita

SIMPL Module to connect to Visionary Solutions Decoders Intended to be use with a UDP Interface. It will start polling the decoder when registered. It will stop polling when unregistered.Polling will happen every 2 seconds

Dgi_Simpl.BlackMagic.Design.VideoHub.Module by: Alvaro Yurrita

Initial Release