Dgi_Simpl.Crestron.NVX.Edid.Management by: Alvaro Yurrita

This module is used to changed the EDID configuration, either global or by Input Port, of an NVX endpoint transmitter. This functionality is not exposed in the Crestron Database module.

Dgi_Simpl.Extron.DXP.Module by: Alvaro Yurrita

Module to control DXP Series Switches

Dgi_Simpl.mDnsResolver.Module by: Alvaro Yurrita

Initial Release

Dgi_Simpl.Panasonic.Aw.Series.Camera.Module by: Alvaro Yurrita

Initial Release

Dgi_Simpl.Tascam.BD-MP4K.BluRay.Module by: Alvaro Yurrita

Initial Release

Dgi_Simpl.Tesira.Restart.Module by: Alvaro Yurrita

Initial Release

QSCModule by: Crestrron/QSC

The Q-SYS system and it’s associated “custom control objects” or “Named Controls” are designed using Q-SYS Designer software provided by QSC Controls. The processor manages the connection and traffic, while the control modules handle the control of individual “Named Controls” Note: This module will only work with Crestron Device Database 200.00.004.00 and later.

VisionarySolutionsDecoderDriver by: Alvaro.Yurrita

Driver to communicate with Visionary Solutions Decoders. Intended to be use with a UDP Interface. It will start polling the decoder when registered. It will stop polling when unregistered. Polling will happen every 2 seconds