SSH Client

Opens a SSH connection with a third-party Ethernet device for as long as the input is high.

SIMPL+ Wrapper that wraps SSH Client DGI DotNetSshClient

Creates a SIMPL SSH Client with the following attributes:

• IP addresses and ports can be assigned either as a Join Signals or as Parameters, which avoids having to create IP tables.
• Using signals allow to change of addresses or ports on the fly. You must Disconnect and Connect again for the changes to take effect.
• As long as the Connect signal is High the driver will try to connect, even if no remote device connects, or if a device connected, and the dropped its connection. Time between retries will increase with each unsuccessful connection to not overburden the network or the processor.
• Failures are not logged in the Logger. To see results in real time check status of symbol.
• Adds Serilog to log events. Log Levels can be set from Verbose to Error. Default is Error.
• Logs will be written to console when the program runs in an Appliance and to Error Log when running on a server.
• v1.1.0 supports resolving mDNS names

Notes

As its Acronym implies SSH is a Secure Shell implementation. Therefore this driver is assuming that it will be sending commands to the device as if it was a Shell, ie, human readable one line commands terminated by a Return.

Therefore when interfacing with this driver there is no need to append a new line or return character, since a single send message will be interpreted as a one line command. (It will work just fine if the character is inserted though)

This driver does not implement file transfer or anything else that are not one line commands.

For more information on how to use this driver, please refer to the Documentation